DIY LED Range – Glow Bricks

Showing 1–60 of 89 results

10 port expansion with extension lead

Connect this to the AAA battery box or USB plug to increase the amount of LED’s that you can run by 10. Add more expansion bricks to add 10 more lights at a time up to 50!
Comes with a 40cm extension lead to allow you to get your lights further into your MOC. Note that the extension lead is male to male connectors and is only of use when connected from a power source into the expansion brick.

Product categories

10 port expansion with extension lead

1×1 Cone Amber/Yellow

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Amber/Yellow Flashing

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Blue

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Blue Flashing

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Green

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Green Flashing

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Orange

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Orange Flashing

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Red

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cone Red Flashing

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cylinder Amber/Yellow

Take your MOC or Lego set to the next level by adding lights from our DIY range.

Each part features :

An LED installed inside the part allowing it to fit flush with your build.

A 40cm lead that is small enough to fit between crack in the bricks and between studs.

A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.

To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.

1×1 Cylinder Amber/Yellow Flashing