Display Case Lighting *Kmart compatible*
Don’t forget to add either a USB Plug or USB Plug with 4 leads with your order!
Add Lights to your display cases with these ultra bright LED strips. This kit contains 4 strips with a total of 16 LEDs enabling you to light up one display case. You can daisy chain up to 4 of these from the one power connection too.
Like all other DIY items from Glow Bricks powering is sold separately to allow you to choose the best option to suit you.
Glow Bricks does however recommend the use of USB plugs in powering these if you intend to have them on permanent display.
You can power up to 12 display cases using a single USB plug and a 12 port expansion!
12 in stock (can be backordered)
| Weight | 10 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
1×1 Stud Red Flashing
Take your MOC or Lego set to the next level by adding lights from our DIY range.
Each part features :
An LED installed inside the part allowing it to fit flush with your build.
A 40cm lead that is small enough to fit between crack in the bricks and between studs.
A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.
To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.
https://glowbricks.com.au/product-category/diy/power-expansions-extensions/
1×1 Stud Green
Take your MOC or Lego set to the next level by adding lights from our DIY range.
Each part features :
An LED installed inside the part allowing it to fit flush with your build.
A 40cm lead that is small enough to fit between crack in the bricks and between studs.
A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.
To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.
https://glowbricks.com.au/product-category/diy/power-expansions-extensions/
1×1 Plate Red
Take your MOC or Lego set to the next level by adding lights from our DIY range.
Each part features :
An LED installed inside the part allowing it to fit flush with your build.
A 40cm lead that is small enough to fit between crack in the bricks and between studs.
A Standard plug type that allows it to be powered by any of our various power solutions. The plug will fit though a standard Technic pin hole.
To allow for flexibility each part terminates into a plug and requires either a battery pack or USB plug to operate. Click the link below for power options.
https://glowbricks.com.au/product-category/diy/power-expansions-extensions/
Reviews
There are no reviews yet.