Showing all 14 results
Magnetic Connector 2×2 Plate Vertical
Each side is 2×2 by 2 plates high. Total of 4 plates height when connected.
Power Functions Compatible Plug with 4 Leads
Use your Lego Power Functions box to power your Glow Bricks lights using the compatible plug with 4 leads.
12 Port Expansion
This expansion board will allow you to connect up to 12 LED Elements while only using one power input!
AA To USB Battery Box
Some brands of rechargeable batteries are slightly larger than standard and may not fit.
10 port expansion with extension lead
Connect this to the AAA battery box or USB plug to increase the amount of LED’s that you can run by 10. Add more expansion bricks to add 10 more lights at a time up to 50!
Comes with a 40cm extension lead to allow you to get your lights further into your MOC. Note that the extension lead is male to male connectors and is only of use when connected from a power source into the expansion brick.
Cr2032 Battery Box with 4 leads
The Cr2032 Battery box requires 2 CR2032 batteries is intended for use with a limited amount of LEDs or when space is a premium. The battery compartment is just under 4×4 Studs wide and 5 plates in height allowing it to be easily hidden.
Pressing the on button will turn it on, a second press will make the LEDs flash and a third press will turn it off.
While this can be used with 1×4 plates and larger battery life will be reduced.
Cr2032 Battery Box with 2 leads
The Cr2032 Battery box requires 2 CR2032 batteries is intended for use with a limited amount of LEDs or when space is a premium. The battery compartment is just under 4×4 Studs wide and 5 plates in height allowing it to be easily hidden.
Pressing the on button will turn it on, a second press will make the LEDs flash and a third press will turn it off.
While this can be used with 1×4 plates and larger battery life will be reduced.
